Getting Connected 167
: Wi-Fi is turned on.
: Wi-Fi is turned o.
3. Available wireless networks will be detected.
Connect to wireless networks
After Wi-Fi is turned on in Comm Manager, your device scans for available
wireless networks in your area.
To connect to a wireless network
1.
The network names of the
detected wireless networks
will be displayed on a pop-
up message window. Tap the
desired wireless network, then
tap OK.
2. On the next pop-up message window, tap The Internet if the wireless
network connects your device to the Internet. Otherwise, tap Work if
the wireless network connects your device to a private network.
3. If the wireless network is secured by a network key, enter this key,
then tap Connect.
To Next Page
Loading...
