Getting Connected 173
3. In My Work Network, follow the instructions for each type of
connection.
4. Complete the connection wizard, then tap Finish.
10.7 Starting a Data Connection
After setting up a data connection such as GPRS or ISP dial-up on your
device, you can now connect your device to the Internet. The connection
is started automatically when you begin using a program that accesses the
Internet such as Internet Explorer® Mobile.
To manually start a data connection
If you have set up multiple types of data connections on your device, you
can manually start a connection.
1. Tap Start > Settings > Connections tab > Connections.
2. Tap Manage existing connections.
3. Tap and hold the name of the desired connection, then tap Connect.
To disconnect active data connections
Tap Start > Programs > Comm Manager, then tap the Data Connection
button (
).
10.8 Internet Explorer® Mobile
Internet Explorer Mobile is a full-featured Internet browser, optimized for
use on your device.
To open Internet Explorer
On the Today screen, tap Start > Internet Explorer.
To Next Page
Loading...
