HTC Vive Cosmos - Connecting a USB Device; Detaching the face cushion frame; Inserting the USB Device Cable

Connecting a USB device to VIVE Cosmos
You can connect a compatible USB Type-C device to VIVE Cosmos using a USB cable.
1. While holding the visor with one hand, pull up the band.
2. Detach the face cushion frame from the headset. To release the frame from its latches,
gently pull on any side of the frame starting from the bottom, and then pull one side at a
time on the top.
Avoid pulling or squeezing on the sides of the face cushion frame to prevent damaging the
frame.
3. Insert the cable connector of the device into the USB Type-C port on the headset.
14 Headset and headphones