4. Align and push the tabs on the face cushion frame into their corresponding slots on the
headset. Make sure to position the ridge of the face cushion frame below the headset,
audio, and USB cables. You'll hear a click when the face cushion frame locks in place.
5. Connect the other end of the USB cable to USB Type-C device.
Removing the face cushions
You can remove the face cushions for cleaning. To learn how to clean the face cushion, see
Cleaning the face cushions on page 22.
1. To remove the face cushions, gently peel starting from the bottom ends of each face
cushion until they detach from the face cushion frame.
15 Headset and headphones
To Next Page
Loading...
