Detaching the on-ear headphones from the headset band
To use your own headphones with VIVE Cosmos, you'll need the replacement kit for
headphones. For details on how to order the kit, contact customer care.
Before using your own earphones, you first need to detach the on-ear headphones from the
headset band.
1. On the right side of the band, disconnect the audio plug from the audio cable connector.
2. Remove the side cushions and front pad from the headset band. For details, see Removing
the front and back pads on page 16.
3. On the front section of the band, carefully pull out the cable of the on-ear headphones
from the groove.
4. On the left and right sides of the band, flip open the metal clasp of each headphone to
detach it.
After detaching the on-ear headphones, you need to attach cable guides before plugging in your
own earphones. For details, see Attaching the cable guides to the headset band on page 32.
25 Headset and headphones
To Next Page
Loading...
