Reattaching the on-ear headphones to the headset band
You can reattach the on-ear headphones if you've used your own earphones with VIVE Cosmos.
Before attaching the on-ear headphones to the headset band, do the following:
1. Remove the cable guides, screws, and rubber pad, which are part of the replacement kit
for earphones, as well as the side cushions from the headset band. For details, see
Detaching the cable guides from the headset band on page 33.
Use a cross-shaped screwdriver (PH00) to detach the screws. Make sure to keep these
parts in a safe place.
26 Headset and headphones
To Next Page
Loading...
