Hold the headset strap against the headset band so that it stays in place. Then with your
other hand, gently pull up on the headset strap to lock it into place.
4. To reattach the back pad, align the tabs (the printed arrow marker should point up) with
the corresponding slots on the headset band. Then press firmly along the back pad to lock
it in place.
Make sure to minimize the gap between the back pad and the headset band.
Replacing the cradle on the wireless adapter
1. From the base of the wireless adapter, unscrew the cradle used for VIVE.
16 VIVE Wireless Adapter for VIVE Cosmos
To Next Page
Loading...
