Charging the power bank
Fully charge the power bank before you use it for the first time.
1. Connect the power bank charging cable to the USB Type-C port on the power bank.
2. Connect the other end of the USB cable to an HTC power adapter.
The HTC power adapter is not included with VIVE Wireless Adapter.
3. Plug the power adapter to an electrical outlet.
4. Check the LEDs on the power bank to see the charging status.
While the power bank is charging, the LEDs blink one after the other to indicate the current
power level. The power bank is fully charged when the fourth LED stops blinking.
Checking the power bank status
Press POWER on the power bank to turn it on and check its current power level. Here's how the
LEDs show remaining power:
21 VIVE Wireless Adapter for VIVE Cosmos
To Next Page
Loading...
