Push the tab on the holder inward to lock the
power bank in place so it won't fall out of the
holder.
2. Connect one end of the power cable into the USB power port on the wireless adapter.
3. Connect the other end of the cable into the USB port on the power bank.
When ready, clip the power bank to somewhere on your body such as your belt. Avoid direct skin
contact with the power bank as it may get hot during use. Then put on your headset with the
attached wireless adapter.
If the power cable length is too short or too long, unplug the cable from the power bank and
adjust accordingly. Then plug it back to the power bank.
20 VIVE Wireless Adapter for VIVE Cosmos
To Next Page
Loading...
