HTP ELU Series Quick Start Guide

8 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

ELU

High Eciency Condensing

Wall-Hung Gas Boilers

Connectivity

Quick Start Guide

ELU series

272 Duchaine Blvd.

New Bedford, MA 02745

www.htproducts.com

420011057800 Rev. 000 Rel. 000 Date 9.06.19

Other manuals for HTP ELU Series

User's Information Manual8 pages

Installation Instructions20 pages

Questions and Answers:

R
Robert DelgadoAug 12, 2025
How to resolve a configuration conflict in my HTP ELU?
- P
  Pamela RomanAug 12, 2025
  If you are experiencing a configuration conflict with your HTP Boiler, it means that each boiler connected to the BUS must have a unique address (parameter 0.4.6), and no boiler can be configured as «b-SIN». To resolve this: 1. Press OK, then choose and correct the boiler address. Press OK again. 2. If the above doesn't work, go to parameter 0.4.6 and set the correct boiler address.
B
Brandon AllenAug 16, 2025
What to do if my HTP ELU Boiler shows a Follower Boiler Missing from BUS Connection error?
- A
  Angela TurnerAug 16, 2025
  If the Follower Boiler is missing from the BUS connection, press the Reset button to clear the error code. If the error persists, check the BUS wiring to ensure it is intact and properly connected. Repair if necessary.

HTP ELU Series Specifications

General

Boiler Type	Condensing
Heat Exchanger Material	Stainless Steel
Fuel Type	Natural Gas
Efficiency	Up to 95%
Ignition Type	Electronic Ignition
Control System	Digital
Venting	PVC

Related product manuals

HTP Elite Ultra ELU-150WBN

HTP Elite Ultra ELU-199WBN

HTP Elite Ultra ELU-199WCN

Preview: HTP EL-80

Preview: HTP Elite EL-80

HTP Elite EL-80

Preview: HTP Elite XL ELX-400

HTP Elite XL ELX-400

HTP Elite XL ELX-500

HTP Elite XL ELX-1000