Need help?Do you have a question about the HTP Pro Pulse 220 MTS and is the answer not in the manual?
General| Input Power | 220V |
|---|---|
| Input Voltage | 220V |
| Output Amperage Range | 5-220A |
| Welding Processes | MIG, TIG, Stick |
| Duty Cycle | 60% at 220A |
Guidelines on eye, skin, and clothing protection, and arc burn prevention.
Precautions against fire hazards and electric shock during welding operations.
Warnings about toxic fumes and the importance of adequate ventilation.
Detailed warnings and precautions regarding electrical shock risks.
Details on power requirements and generator compatibility for the welding machine.
Explanation of buttons and encoders for machine operation and setup.
Step-by-step guide for initiating a weld using the machine's basic functions.
Details on synergic and manual modes, including program features like burn back and pinch.
Instructions for setting up and performing stick welding operations.
Steps for connecting and performing TIG welding with the machine.
Key considerations for successful MIG welding, like wire, gas, and drive rolls.
How to adjust burn back and pinch for proper wire management upon weld completion.
Common causes and solutions for burn back issues during welding.
How the machine protects itself from overload and overheating conditions.
Understanding the machine's duty cycle ratings and operational limits.
To Next Page
