HUANUO HNWDS1 - User Manual

English - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 01- 10
Deutsch - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11- 20
Français - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 21- 30
Español - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 31- 40
Italiano - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 41- 50
日本語 ------------------------------- 51-60
Model: HNWDS1
Rev00(B)
Wall Monitor Arm Instruction Manual
Thank you for choosing this HUANUO product! At HUANUO, we strive to
provide you with the best quality products and services in the industry.
Should you have any issues, please don't hesitate to contact us.
Technical Support:
(US/CA) 1-800-556-0533 Mon-Fri 8am - 8pm (CST)
(UK) 44-808-196-3874 Mon-Fri 2pm - 10pm (UTC）
Other Info:
support@huanuoav.com
support_jp@huanuoav.com (JP)
Website: www.huanuoav.com

Summary

Important Safety Information

General Safety Guidelines

Weight Capacity

VESA Mount Compatibility

Tension Adjustment

Wood Stud Installation

Solid Concrete or Block Installation

Wall Plate Positioning and Drilling

Arm Assembly Installation

Install arm assembly using lag screws (W-A) and anchors (W-C), avoiding mortar.

Attach Monitor Plates to Monitors

Bolt Length Verification

Flat Back Monitor Attachment

Attach monitor plate using M-A bolts and M-C washers with the large Allen key.

Round Back Monitor Attachment

Attach monitor plate using M-B bolts, M-D spacers, and M-C washers with Allen key.

Secure Monitors to Arms

Monitor Securing Mechanism

Secure monitor to the arm using bolt M-E, ensuring it's properly fastened.

Adjust Gas Spring Tension

Horizontal Position Requirement

Tension Adjustment Procedure

Adjust tension clockwise (reduce) or counter-clockwise (increase) for desired height.

Adjust Tilt Angle

Tilt Bolt Adjustment

HUANUO HNWDS1 Specifications

General

Brand	HUANUO
Model	HNWDS1
Category	Racks & Stands
Language	English