Need help?Do you have a question about the HUANUO HNCM2 and is the answer not in the manual?
General| Product Type | Monitor Stand |
|---|---|
| Color | Black |
| Adjustable Height | Yes |
| Compatibility | Monitors |
| VESA Compatibility | 75x75mm, 100x100mm |
| Rotation | 360° |
| Material | Steel, Aluminum |
| Mounting Options | C-clamp, Grommet |
Carefully open carton, remove contents, and lay out to avoid damage. Check all parts against the list and read instructions before installation.
Operate with care, read all instructions, use safety equipment. Contact a qualified contractor if unsure about installation safety.
Attaches the pole to the desktop using a C-clamp mechanism with bolts and a plastic knob for adjustment.
Installs the pole using a base plate and M10 bolt through a desk grommet hole or a drilled hole.
Attaches the VESA plate to the laptop tray using M4x10 bolts and M4 nuts.
Attaches the VESA plate to a monitor with a flat back using M5x14 bolts.
Attaches the VESA plate to a monitor with a curved or recessed back using M4x12 thumb bolts and M4 spacers.
Tighten the bolt using the supplied Allen Key to fix the tilt angle of the arm.
Use the supplied Allen Key to make general adjustments to the arm positioning and stability.
To Next Page
