Huawei AR1200 Series - Page 15

Figure 3-1 Insert the SAE220
Spring
2. Squeeze inward ejector levers on two sides of the SAE220 until the spring on the board
comes into close contact with the device.
Figure 3-2 Squeeze ejector levers
3. Turn the Phillips screwdriver to tighten the captive screws.
Huawei AR1200&2200&3200 Series Enterprise Routers
SAE Card Usage Guide 3 Installing the SAE Board
Issue 02 (2012-08-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9