Huawei AR1200 Series - Example for Logging in to the SAE Board Using Remote Desktop Software

To Next Page

To Previous Page

9.1 Example for Logging In to the SAE Board Using Remote

Desktop Software

This example describes how to log in to the SAE board using Windows remote desktop software.

Networking Requirements

The SAE board connects to a LAN through its GE interface and has a reachable route to a

computer. A user needs to log in to the SAE board from the computer to manage and maintain

the SAE board.

Figure 9-1 Networking for remote login to the SAE board

LAN

Router

SAE GE0

192.168.10.2

192.168.10.1

Configuration Roadmap

1. Connect a GE interface of the SAE board to a LAN.

2. Configure network parameters, including the IP address of the SAE board.

3. Enable the remote desktop service.

4. Add the remote desktop service to the inbound rule list of the firewall.

5. Log in to the SAE board using the computer.

Procedure

Step 1 Connect a GE interface of the SAE board to a LAN.

Step 2 Configure the IP address of the SAE board.

Access the Local Area Connection Properties dialog box of the SAE GE interface.

Huawei AR1200&2200&3200 Series Enterprise Routers

SAE Card Usage Guide 9 Configuration Example

Issue 02 (2012-08-30) Huawei Proprietary and Confidential

Other manuals for Huawei AR1200 Series