4 Connecting the SAE Board
This section describes how to connect the SAE board to the network.
NOTE
SAE220 and SAE550 have the same interfaces. The following takes the SAE220 board as example.
Figure 4-1 Connection diagram of the SAE220 board interfaces
Network
Network
4
USB flash drive/
USB CD-ROM
1: Console cable
l The 8-pin RJ45 connector is inserted into the Console port (CON/AUX port) of the SAE
board.
l The DB9 male connector is connected to a maintenance terminal, such as a computer.
2: USB port cable, used to connect to a mouse, keyboard, flash memory, or USB drive.
3: VGA interface cable, used to connect to a computer monitor. The cable connectors are both
DB15 male connectors.
Huawei AR1200&2200&3200 Series Enterprise Routers
SAE Card Usage Guide 4 Connecting the SAE Board
Issue 02 (2012-08-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
12
To Next Page
Loading...
