Huawei AR1200 Series - Restarting the SAE Board

Figure 7-14 Successful login
The login is successful. You can use Windows CLI to manage and maintain the SAE
board remotely.
l Logging In to the SAE Board Using Windows Remote Desktop Software
1. In a user terminal that runs Windows XP, choose Start > Programs > Accessories >
Communications > Remote Desktop Connection.
Figure 7-15 Remote Desktop Connection
2. Enter the IP address or user name of the SAE board, and click Connect. On the login
page that is displayed, enter the user name and password of the SAE board.
The login is successful. You can use Windows remote desktop software to manage
and maintain the SAE board remotely.
----End
7.3 Restarting the SAE Board
This section describes how to restart the SAE board.
Huawei AR1200&2200&3200 Series Enterprise Routers
SAE Card Usage Guide 7 Managing the SAE Board
Issue 02 (2012-08-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
48