Huawei AR1200 Series - Page 55

Context
The following describes threes ways to restart the SAE board.
CAUTION
Save the configuration on the SAE board before restart. Forcibly restarting the SAE board will
result in configuration data loss.
Procedure
l Restarting the SAE Board by Pressing the Power Button
To restart the SAE board, press the power button.
To shut down the SAE board, hold down the power button for at least 5 seconds.
l Restarting the SAE Board in the User View of the Device Where the SAE Board Is
Located
Run the reset slot slot-number command to power off and restart the SAE board in the
specified slot.
l Restarting the SAE Board on the Operating System
On Windows Server 2008 R2, choose StartRestart, and click OK.
----End
Huawei AR1200&2200&3200 Series Enterprise Routers
SAE Card Usage Guide 7 Managing the SAE Board
Issue 02 (2012-08-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
49