Figure 5-6 Set the network device as the first boot device
Step 6 Press F4 to save configurations and exit.
Step 7 Reboot the SAE board.
The board starts from the preset network device and connects to the PXE server.
Step 8 Install the operating system as prompted.
NOTE
Ensure that the operating system installation program is stored in the PXE server.
----End
Huawei AR1200&2200&3200 Series Enterprise Routers
SAE Card Usage Guide 5 Installing the Operating System on the SAE Board
Issue 02 (2012-08-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
21
To Next Page
Loading...
