Figure 9-10 Internet Protocol Version 4(TCP/IPv4) Properties
Step 3 Enable the Telnet service of the SAE board.
NOTE
By default, the Telnet service is not installed on Windows Server 2008 R2. To install the Telnet service,
in Server Manager > Features, click Add Features and use Add Features Wizard to install Telnet
Server and Telnet Client.
The Telnet Server rule in the inbound rule list of Windows Firewall with Advanced Security is
automatically enabled when the Telnet server is installed.
Choose Start > Administrative > Server Manager. In the left navigation tree that is displayed,
choose Configuration > Services, and double-click Telnet in the right list.
Huawei AR1200&2200&3200 Series Enterprise Routers
SAE Card Usage Guide 9 Configuration Example
Issue 02 (2012-08-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
60
To Next Page
Loading...
