NOTE
If the spring latch is too tight to move down, you can pull down the spring latch during the installation.
----End
5.4 Installing a 180 W PoE Midspan on a DIN Rail
Context
DANGER
To avoid electric shock, do not connect power cables while the power is on.
Make sure the following prerequisites are met before the installation:
l The DIN rail has been secured in position.
l The router is placed near the DIN rail for convenient movement.
Tools and Accessories
l DIN rail
l 180 W PoE midspan
Huawei AR500&AR530&AR550 series Industrial Switch
Routers
Hardware Installation and Maintenance Guide
5 Installing an AR550 Series Industrial Switching Router
Issue 05 (2015-12-01) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
96
To Next Page
Loading...
