----End
3.2 Scenario 2: Mounting the Router on a Wall
Context
DANGER
Before drilling holes on a wall, make sure there are no power cables in the wall to avoid
electric shock.
NOTICE
l Take water-proofing measures to protect a wall-mounted router from damages caused by
water.
l Screws must be installed solid in the wall; otherwise, the wall-mounted router may fall
down after cables are connected.
l Ensure that there are no flammable or explosive materials near the router and no
obstructions within 100 mm around the router.
l Install the router at an appropriate height to ensure that the indicators can be observed
easily.
Tools and Accessories
l Measuring tape
l Marker
l Phillips screwdriver
l Mounting bracket
l M3x6 countersunk screws (four)
l M4x8 pan head screws (two)
Huawei AR500&AR530&AR550 series Industrial Switch
Routers
Hardware Installation and Maintenance Guide
3 Installing an AR500 Series Industrial Access Router
Issue 05 (2015-12-01) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
13
To Next Page
Loading...
