NOTICE
There must be no exposed metal part at the joints of wire holes and bare wires on
the AC/DC input terminal block.
Step 6 Connect the AC or DC input power cables.
1. Insert the AC/DC input terminal block to the AC/DC input socket of the AC power
module, and then tighten the slotted screws at both ends of the terminal block with the
flat-head screwdriver.
2. Connect cables at the other end to an external power supply system.
----End
5.6.7 Connecting the 180 W PoE Midspan
Huawei AR500&AR530&AR550 series Industrial Switch
Routers
Hardware Installation and Maintenance Guide
5 Installing an AR550 Series Industrial Switching Router
Issue 05 (2015-12-01) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
115
To Next Page
Loading...
