Huawei AR530 Series - 4.7 (Optional) Installing Antennas

NOTE
The AR531GR-U-H is used as an example to describe the installation procedure.
Tools
l Phillips screwdriver
l SIM cards (separately purchased)
Procedure
Step 1 Use a Phillips screwdriver to loosen the screw on the SIM card cover, and remove the SIM
card cover from the router. Keep the SIM card cover in an appropriate place for later use.
Step 2 Align the SIM card with a SIM card slot and horizontally insert the SIM card into the slot,
until you hear a click.
NOTICE
When inserting a SIM card, keep the notch on the SIM card in the same direction as the notch
marked below the slot.
NOTE
If only one SIM card needs to be installed, install it in slot SIM1 (on the left).
Step 3 Install the SIM card cover back to the router and tighten the screw to fix the cover.
1 2 3
----End
4.7 (Optional) Installing Antennas
Huawei AR500&AR530&AR550 series Industrial Switch
Routers
Hardware Installation and Maintenance Guide
4 Installing an AR530 Series Industrial Switching Router
Issue 05 (2015-12-01) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
63