Huawei AR530 Series - 5.6.4 Connecting Optical Modules and Optical Fibers

420 331
+ZNKXTKZOTZKXLGIKUL
ZNKXKSUZKJK\OIK
Step 4 Arrange the Ethernet cables to make them parallel, and then bundle them with cable ties. Use
diagonal pliers to cut off redundant cable ties.
Step 5 Remove the temporary labels from the Ethernet cables, and then attach formal labels 2 cm
away from the connectors at both ends.
----End
Follow-up Procedure
Check the following items after connecting Ethernet cables:
l Labels are correctly filled and securely attached to cables, with texts facing the same
direction.
l Cables and connectors are complete, intact, and tightly connected.
5.6.4 Connecting Optical Modules and Optical Fibers
Huawei AR500&AR530&AR550 series Industrial Switch
Routers
Hardware Installation and Maintenance Guide
5 Installing an AR550 Series Industrial Switching Router
Issue 05 (2015-12-01) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
105