NOTICE
Do not cut the metal conductor of the cable when peeling insulation coating.
2. Insert the bare wire into a hole on the terminal block. Then the reed is closed to lock the
cable in the hole.
NOTICE
There must be no exposed metal part at the joints of wire holes and bare wires on the AC
input terminal block.
Step 6 Connect the AC input power cables.
1. Insert the AC input terminal block to the AC input socket of the 180 W PoE midspan,
and then tighten the slotted screws at both ends of the terminal block with the flat-head
screwdriver.
2. Connect AC cables at the other end to an external AC power supply system.
Huawei AR500&AR530&AR550 series Industrial Switch
Routers
Hardware Installation and Maintenance Guide
5 Installing an AR550 Series Industrial Switching Router
Issue 05 (2015-12-01) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
120
To Next Page
Loading...
