l The router is placed near the DIN rail for convenient movement.
Tools and Accessories
l ESD wrist strap
l Phillips screwdriver
l M3 screw
l DIN mounting kit
Procedure
Step 1 Wear an ESD wrist strap. Ensure that the ESD wrist strap is grounded and in a close contact
with your wrist.
Step 2 Mount the DIN mounting kit onto the rear panel of the router with M3 screws, and then use a
Phillips screwdriver to tighten the M3 screws.
Step 3 Use the Phillips screwdriver to loosen the screws on the left fixture on the DIN rail in the
meter box, and then move the fixture to leave appropriate clearance for the router.
Huawei AR500&AR530&AR550 series Industrial Switch
Routers
Hardware Installation and Maintenance Guide
3 Installing an AR500 Series Industrial Access Router
Issue 05 (2015-12-01) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
18
To Next Page
Loading...
