Huawei AR530 Series - Page 89

3. Tighten the screw on the 2-pin terminal block with a flat-head screwdriver to lock the
cable.
NOTICE
There must be no exposed metal part at the joints of wire holes and bare wires on the 2-
pin terminal block.
Step 4 Connect the 2-pin DC power cables.
Huawei AR500&AR530&AR550 series Industrial Switch
Routers
Hardware Installation and Maintenance Guide
4 Installing an AR530 Series Industrial Switching Router
Issue 05 (2015-12-01) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
81