5 Three Wi-Fi antenna interfaces 6 LAN interfaces: four GE electrical
interfaces
NOTE
l LAN interfaces GE0 to GE3 can be
configured as WAN interfaces.
l GE0 is a management interface and is
used to upgrade the router.
7 USB interface (host) 8 RST button
NOTE
This button is used to reset the router.
l To restore the factory settings, hold down
the button for at least 5 seconds.
l To reset the system, press the button.
Resetting the router will interrupt services.
Exercise caution when deciding to press this
button.
9 CONSOLE interface 10 Ground point
NOTE
To protect the router from lightning and
interference, reliably ground the router using
a 6.8 Ground Cable.
11 Two SIM card slots of LTE0
NOTE
l The SIM card slots support double-card
single-standby.
l The router must use industrial SIM cards.
12 Two SIM card slots of LTE1
NOTE
l The SIM card slots support double-card
single-standby.
l The router must use industrial SIM cards.
Indicator Description
Figure 3-27 shows the indicators on the AR503EDGW-Lc.
Huawei
AR500&AR510&AR531&AR550&1500&AR2500
Industrial Switch Routers
Hardware Description
3 Chassis
Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd. 188
To Next Page
Loading...
