Appearance and Structure
Figure 6-59 shows the structure of a 3.5 mm headset cable.
Figure 6-59 Structure of a 3.5 mm headset cable
Pin Assignments
None
Connection
A 3.5 mm headset cable is connected as follows:
l The P1 connector is connected to the audio interface on a router.
l The P2 connector is connected to an audio output device.
Ordering Information
Table 6-93 provides the 3.5 mm headset cable ordering information.
Table 6-93 Headset cable ordering information
Part Number
Description Remarks
04050909-001 Audio Video&Control
Signal Cable, Audio Cable,
0.8m, 3.5mm Dimensional
sound connector, 2*COAX,
3.5mm Dimensional sound
connector
Mandatory
6.14 CVBS Video Cable
Description
A CVBS video cable connects a router to a video terminal. The cable connects to the router
through the DVI-I connector and connects to the video terminal through the BNC connector.
Huawei
AR500&AR510&AR531&AR550&1500&AR2500
Industrial Switch Routers
Hardware Description
6 Cables
Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd. 718