Connection
The 5-pin phoenix connector (RS485/RS422) cable can be assembled with cables differently
to provide RS485 or RS422 connection.
l For RS485 connection, insert three cables to the D+, D-, and GND holes on the 5-pin
terminal block.
l For RS422 connection, insert five cables to the T+, T-, R+, R-, and GND holes on the 5-
pin terminal block.
A 5-pin phoenix connector (RS485/RS422) cable is connected as follows:
l The 5-pin terminal block is connected to the RS485/RS422 interface on a router.
l The other end is connected to a meter with an RS485 interface or a monitoring terminal
with an RS485/RS422 interface.
6.2.9 5-Pin M12 DC Power Terminal
Description
A 5-pin M12 DC power terminal receives power from two inputs: one input directly from a
power source on the vehicle (constant power supply) and the other input from the ACC circuit
(switch controlled power supply).
NOTE
Either the ACC pin or a positive pole pin needs to be connected to an external power supply to supply power
to the device.
Appearance and Structure
Figure 6-14 shows the structure of a 5-pin M12 DC power terminal.
Figure 6-14 Structure of a 5-pin M12 DC power terminal
+
+
-
-
21
1
5
2
4
3
3
4
5
2
1
34
5
P1 P2
ACC
Pin Assignments
Table 6-28 lists the pin assignments of a 5-pin M12 DC power terminal.
Table 6-28 Pin assignments of a 5-pin M12 DC power terminal
Connector P1
Connector P2
1 -
Huawei
AR500&AR510&AR531&AR550&1500&AR2500
Industrial Switch Routers
Hardware Description
6 Cables
Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd. 660
To Next Page
Loading...
