Figure 3-74 AR513W-V1 appearance
1
IN
micro SD
HDMI
WiFi1
WiFi0
1:12 V
2:NC
3:GND
4:NC
2
34
1 43252
11
7
9
1068
GE1
GE0
USB
(OTG)
CONSOLE
12
1
Power jack
NOTE
Use a DC power cable to connect the router
to an external power source.
2 Two Wi-Fi antenna interfaces
3 HDMI video interface 4 Micro SD card slot
5 Ground point
NOTE
To protect the router from lightning and
interference, reliably ground the router using
a 6.8 Ground Cable.
6 USB interface (host)
7 USB interface (OTG) 8 CONSOLE interface
9 WAN interfaces: two GE electrical
interfaces
10 LAN interfaces: eight FE electrical
interfaces
11 RESET button
NOTE
This button is used to reset the router.
l To restore the factory settings, hold down
the button for at least 5 seconds.
l To reset the system, press the button.
Resetting the router will interrupt services.
Exercise caution when deciding to press this
button.
12
This interface is reserved for future use.
Huawei
AR500&AR510&AR531&AR550&1500&AR2500
Industrial Switch Routers
Hardware Description
3 Chassis
Issue 10 (2019-03-06) Copyright © Huawei Technologies Co., Ltd. 409
To Next Page
Loading...
