Huawei Ascend D1 quad XL - Using the Wps Button

Data Connection
41
hotspots within range and display a list of detected Wi-Fi
networks.
4. Select the desired Wi-Fi network. If you select a secured
network, enter the password when prompted.
• If Wi-Fi and mobile network are both enabled, your phone
connects to the Wi-Fi network preferentially and switches to the
mobile network when Wi-Fi is unavailable.
• To add a new Wi-Fi hotspot Service Set Identifier (SSID), on the
Wi-Fi settings screen touch ADD NETWORK .
• Obstacles such as walls may block Wi-Fi signals and reduce the
signal strength.
Connecting to Wi-Fi Using WPS
Wi-Fi Protected Setup (WPS) is also called fast safe setup. It
simplifies the setup of a Wi-Fi connection. Instead of complex
settings on the Wi-Fi hotspot management software, the WPS
function allows you to set up a safe Wi-Fi connection by
pressing the WPS button or entering the PIN.
Before connecting your device to a Wi-Fi hotspot, ensure that
the Wi-Fi hotspot supports the WPS function.
Using the WPS Button
1. Enable Wi-Fi, and then go to the Wi-Fi screen. In Wi-Fi
network list, touch the hotspot you want to connect to.
2. In the displayed dialog box, select the
Show advanced
options
check box. Touch Off in WPS , and then choose
Push button > Connect from the displayed options menu.
3. Touch the Wi-Fi access point button. A message will be
displayed when your phone connects to the network.