Preparations
5
1.
Insert the end of an eject tool or paper clip into the hole next to the micro-SIM
card tray to release it.
2. Gently pull out the micro-SIM card tray.
3. Follow the directions on the micro-SIM card tray to place the micro-SIM card
in the tray, and then push the tray back into place.
a Apply pressure to the front end of the SIM card to make sure it's
not portruding out as you insert the tray into the card slot.
b Once the front end of the card has been inserted, apply pressure
to the rear end of the card and fully insert the tray into the slot.
To Next Page
Loading...
