Restoring Factory Defaults
If you are uncertain of which settings you have configured or changed, you can
restore the factory default settings of the B890 4G LTE Smart Hub, and then
reconfigure.
To restore the factory defaults, use a sharp-pointed object to press and hold the
RESET button until the signal indicators on the B890 4G LTE Smart Hub blinks.
After the factory default settings are restored, the B890 4G LTE Smart Hub will
restart automatically.
Note:
Restoring factory defaults will delete all the B890 Smart Hub's user-defined
settings and restore all settings on the web user interface to their defaults.
For More Information
If the B890 4G LTE Smart Hub does not work properly:
See the online help information on the web user interface or
TELUSmobility.com/support.
Restart the B890 4G LTE Smart Hub using the power button, then unplug the Smart
Hub for 2 minutes.
Press and hold the Dial-Up button on the top of the Smart Hub for 10 seconds.
Remove and reinsert your TELUS SIM card.
Try using the Smart Hub with a different Phone, different RJ-11 or Ethernet cable or
a different computer.
Restore the B890 4G LTE Smart Hub to its factory defaults.
Contact TELUS Customer Care at 1-866-558-2273.
21
To Next Page
Loading...
