Getting Started: Setting up an
Internet Connection
Connecting your devices (computer, laptop, tablet, etc.) to the Internet
You are able to connect to the Internet via a wired or wireless (Wi-Fi) connection.
Follow the instructions below to set up your connection of choice.
Wired connection with an Ethernet Cable
Step 1 Connect the Yellow Ethernet cable provided to one of the 3 LAN ports
and connect the other end to your computer.
Note:
Do not connect the Yellow Ethernet cable to the WAN port that is
closest to the right hand side of the device.
Step 2 Wait approximately 30 - 60 seconds for the connection to establish.
Check the indicators on the front panel of your Smart Hub. If they are lit
as outlined you are ready to use the internet with your new Smart Hub!
5
To Next Page
Loading...
Need help?
General
