Getting Started: Setting up your
Phone
Follow these simple steps to connect a Phone to your 4G LTE Smart Hub.
Step 1 For voice calls, connect a standard telephone to the Telephone Port
using a RJ-11 cable (you will require a voice plan in addition to a
data plan to use this feature).
Important Notice:
If the B890 4G LTE Smart Hub is to be connected to the existing wall outlet
telephone wiring the existing wiring MUST first be disconnected from any
outside landline telephone network. Not disconnecting from any outside
landline telephone network will cause excessive heat or even damage the
Smart Hub.
Step 2 Check the indicators on the front panel of your Smart Hub. At minimum
the indicators must be lit as outlined.
You are ready to make your first phone call on your new Smart Hub! Refer to the
section “Using your 4G LTE Smart Hub’s Phone Features” for more help on using
a phone with your Smart Hub.
Note:
Radio signals can interfere with the telephone call connection and quality. To
eliminate the risk of possible interference, place the telephone at least 1 meter
away from the B890 4G LTE Smart Hub.
Fax is not support on this 4G LTE Smart Hub.
9
To Next Page
Loading...
