6
Charging the Battery
1.
Connect the travel charger to the charger interface at the bottom of
your phone.
2. Connect the charger to an AC power socket.
During the charging, the
icon on the upper right corner of the
screen is in an animated status.
3. Wait until the phone is fully charged.
4. Disconnect the charger from the AC power socket.
5. Press the gray buttons on both sides of the charger connector to
disconnect it from the phone.
Caution:
z Do not use the damaged battery or charger.
z Before using the travel charger, ensure that the battery is
installed in your phone.
Powering On/Off the Phone
Press and hold for two seconds to power on (or off) the phone.
Changing the Language
1.
In the the standby mode, press (Menu) and select Settings >
Phone Settings > Language.
2. Press to choose English or .
3. Press (Select) to decide the language for display.
Using the Function Menu
1.
In the the standby mode, press (Menu).
2. Press the arrow key to select the desired function menu.
3. Press (Select) to display the selected menu.
4. Display the submenu in either of the ways:
To Next Page
Loading...
