16
Security
Enabling/Disabling the Phone Lock
1.
Press (Menu) and select Settings > Security > Phone Lock.
2. Enter the correct phone lock code and press (OK).
3. Select On/Off to enable/disable the phone lock.
Changing the Phone Lock Code
The default phone lock code is "0000". You can change it into any numeric
string of 4 to 8 digits. Do remember your phone lock code. If you forget it,
contact your local dealer.
1. Press (Menu) and select Settings > Security > Phone Lock.
2. Enter the correct phone lock code and press (OK).
3. Select Change Code.
4. Enter a new phone lock code and press (OK).
5. Re-enter the new phone lock code and press (OK).
Setting the PIN Lock
PIN protects your UIM card from unauthorized use. The personal unlocking
key (PUK) is used for changing the locked PIN. PIN and PUK are delivered
with the UIM card.
Note:
z If you enter wrong PINs for three times（The upper limit is
determined by the UIM card）,the phone prompts you to enter
the correct PUK.
z If you enter wrong PUKs for 10 times, the UIM card becomes
invalid. In this case, contact the service provider for a new
card. If you forget the PUK, contact the service provider for
help.
To Next Page
Loading...
