7
This takes the Windows XP operating system (OS) as
an example to describe how to configure your computer.
For other OSs, the configurations may be different and
you need to configure them as required.
The wireless configuration allows your PC to connect to the
device through the wireless network. If you need only the
Ethernet to connect your PC, you can skip this part.
Configuration Requirements
To set up wireless network connection, your PC must be
configured with the WLAN adapter that supports the IEEE
802.11 b/g protocol.
If the encryption function is enabled, you need to ensure
that all PCs connecting to the device use the same key as
that of the device.
For the use of WLAN adapter, refer to the WLAN adapter
user guide provided by the manufacturer.
For the encryption configurations, see "Security Setting >
Security Policy".
For SSID parameters configuration, see "Wireless
Settings > Basic Settings > Wireless Network".
Configuring the Wireless Network
Choose Start > Control Panel > Network
Connections > Wireless Network Connection.
Click Show Wireless Networks to display the
wireless network connection list.
Select the network connection that the SSID is the
same as that of the device, and then click Connect.
If the encryption parameter is set for the device, the
Wireless Network Connection dialog box is
displayed and requires the network key and
confirmation. The value you entered must be the
same as the WPA Pre-Shared Key or Network Key
of the device.
Wait for a while after you enter the correct network
key. The wireless connection icon displays in the
Configuring Your Computer
To Next Page
Loading...
