11
provided by the ISP.
Service Number: Input the dial-up number which is
used to initiate the network call.
Connection Mode: Select the dial-up access mode.
Keep Alive: The device automatically connects to the
Internet and does not disconnect when no data is
transmitted.
Connect on Demand: The device automatically connects
to the Internet when data transmission exists. When the
duration of no data transmission exceeds the maximum
idle time, the device disconnects the Internet connection.
Manual Connect: The device connects to the Internet
after you click Connect on the connection page. For details,
see "Accessing the Internet".
PIN Code Service: Click PIN Code Config button to go
to the configuration page.
PIN Code Operation: Select Disable/Modify to disable or
modify the PIN Code. Please input the new PIN Code and
then confirm the PIN Code in the corresponding field if
Modify is selected.
PIN Code: Input the effective PIN code to validate the
configuration of the PIN Code.
New PIN Code/ Reconfirm new PIN Code: Input the new
PIN code and input it again for confirmation.
Please be noted that the maximum number of
times of PIN input will be 3, so PUK code will be
needed to unlock the PIN code input.
To Next Page
Loading...
