13
Connecting to the Internet
Using an LTE, 3G, or 2G Network
By default, the CPE's management parameters have been preset according to your operator's
requirements. The CPE will be connected to the Internet after its startup.
If data is transmitted, the CPE will automatically connect to the Internet. If data is not
transmitted for a period of time, the CPE will automatically disconnect from the network
connection.
You can log in to the web management page and enable or disable automatic dialing while
roaming. If this function is turned off, when the CPE enters a roaming network, it will
automatically disconnect from the Internet connection that has already been established. You
will need to manually establish this network connection again.
To Next Page
Loading...
