22
Tips
The CPE may overheat when used in high temperature environments for an extend period of
time. If this occurs, the CPE will run at lower rates to protect itself, and the decorative indicator
will turn off and cannot be turned back on. If your CPE is overheating, move the CPE to a
location with better ventilation, and make sure the CPE is sourcing power from a power socket
without the battery installed. Otherwise, the CPE may automatically disconnect its network
connections and power off. Do not attempt to power on the CPE until it has been fully cooled.
If you are still experiencing any issues with your CPE, try:
Consult the online help on the web management page.
Restart the CPE.
Restore the CPE to the factory settings.
Consult your operator.
LTE is a trademark of ETSI. 31010TQF_01
To Next Page
Loading...
