Huawei E587 - Establishing a WPS Connection; WPS Connection Steps

15
Establishing a WPS Connection
If a Wi-Fi client connected to the Mobile WiFi
supports the WPS function, a network key will be
automatically generated without manual input. To
establish a WPS connection, perform the following
steps:
1. Power on the Mobile WiFi.
2. Start the client.
3. Enable the WPS function of the Mobile WiFi.
Note: After Wi-Fi is enabled, press and hold
to enable the WPS function of the
Mobile WiFi.
4. Enable the WPS function of the client.
Note: For WPS operations on the client, see the user guide of the client.