To Next Page
D
Darren OwensJul 29, 2025
Why can't the Huawei Modem Dialer tool find a signal?
- CconnorstoneJul 30, 2025
Ensure that the number you are using is activated. Contact your operator to verify that the parameters are configured correctly.
Why can't the Huawei Modem Dialer tool find a signal?
Ensure that the number you are using is activated. Contact your operator to verify that the parameters are configured correctly.
How to restore the signal on my Huawei Modem after restarting my computer?
Check that the device is properly connected and that you have network coverage. You can also try unplugging the device and plugging it back in.
How to fix Huawei EC156 driver installation failure?
Try uninstalling the driver and then reinstalling it.
Why is my Huawei EC156 Modem not recognizing the Micro-SD card?
The card may not be inserted correctly, or it might be the wrong size or format. Re-insert the card, or try another Micro-SD card, ensuring that its capacity and format are correct.
What to do if the Huawei EC156 device cannot be found by the Dialer tool?
Check if the device can be found in the Device Manager. If not, check if you can see the CD 'Tata Photon+' from 'My Computer'; if so, eject the CD.
Why am I getting a Firewall Security Alert when connecting my Huawei Modem?
The device must be allowed to connect through your firewall. Contact your firewall software vendor for assistance.
What to do if Huawei EC156 Modem device is not detecting in MAC OS?
Check if the drivers (HuaweiDataCardDriver.kext) are present in the path /System/Library/Extensions. If they are not present, reinstall the application.
General| Model | Huawei EC156 |
|---|---|
| Type | USB Modem |
| Max Upload Speed | 5.76 Mbps |
| Interface | USB 2.0 |
| Network Support | EDGE/GPRS/GSM |
| Compatibility | Windows, Mac OS |
| Frequency Bands | 850/900/1800/1900 MHz |
Install the necessary software and drivers for the device on Windows XP.
Guide to activate the Tata Photon Plus device using a PIN.
Steps to follow if the device activation process fails.
Insert the device and start the installation from the drive.
Click the "Connect" button to establish internet connection.
Open the modem folder and navigate to the installation directory.
Run the installation script using the terminal command.
Click the "Connect" button to establish internet connection.
Solutions for problems with driver/dialer installation and first-time use.
Troubleshooting device detection, signal search, and internet connection issues.
Resolving issues specific to MAC OS and Linux detection/signal.
Guidelines for use near electronic/medical devices, in explosive atmospheres, driving, or flying.
Advice on child safety, accessory use, device cleaning, and operating environment.
Details on SAR, FCC statement, and cautions regarding RF exposure.
