37
5. Press (Save) to add the channel to the channel list or press (Back) to
stop tuning and return to the broadcasting screen.
Inching Tuning
1. In the standby mode, select Menu > FM Radio.
2. Press
(Options) and select Inching Tuning.
3. Press the
/ and the FWT searches for all available channels between
87.5 MHz and 108.0 MHz. The tuning increases or decreases 0.05 MHz each time.
4. Press
(Save) to add a channel to the channel list and return to the broadcasting
screen or press
(Back) to stop tuning and return to the broadcasting screen.
Setting a Frequency
1. In the standby mode, select Menu > FM Radio.
2. Press
(Options) and select Set Frequency.
3. Enter a frequency ranges from 87.5 MHz to 108.0 MHz.
If you enter 3 digits before the decimal, the cursor moves to the right of the decimal
automatically; if you enter 2 digits before the decimal, press the right key to move the
cursor to the right of the decimal.
4. Press
(Save) and returns to the main interface of radio; press (Clear) to
clear the settings and return to the broadcasting screen; press the left/right key to move
the cursor to clear the settings.
Adding a Channel
1. After searching for or set a frequency, press to select Save Channel.
2. Press the
/ to scroll up or down the channel list.
3. Press
(OK) to complete the settings.
If you set the frequency of the selected channel, the FWT prompts "Replace existing
channel?" Press
(Ye s) to replace. Press (No) to re-select.
Deleting a Channel
1. In the standby mode, select Menu > FM Radio.
2. Press
(Options) and select Delete Channel.
3. Press the
/ to scroll up or down the channel list.
4. Press
(Delete) to delete a non-empty channel.
5. Press
(Ye s) to delete; press (No) to cancel.
To Next Page
Loading...
