Huawei FusionModule5000 Quick Installation Guide

3
Preparations
Tools
a
Unpacking and Checking
b
No.
Item
1
Visually inspect the PDU appearance for shipping damage. If any shipping damage is found, report it to the carrier
immediately.
2
Check the PDU bar code, which is at the rear panel of the PDU, and ensure that it complies with the order. If there is
any discrepancy, contact your local Huawei office immediately.
Do not move the PDU by holding its mounting brackets, front panel, or terminal cover. When you move it, see the
movement regulations.
< 18 kg (< 40 lb)
18–32 kg (40–70 lb)
32–55 kg (70–120 lb)
> 55 kg (> 120 lb)
Device Movement Regulations
c
Get installation tools insulated to prevent electric shocks.
Wire stripper
Polyvinyl
chloride (PVC)
insulation tape Heat gun Cable tie
Protective
gloves
Insulation
gloves
Cotton cloth
Hydraulic
pliers
Heat shrink
tubing (Φ6)
Electrician's
knife
Phillips
screwdriver
(PH2 x 150 mm
or PH3 x 250 mm)
Multimeter
Torque
screwdriver
Flat-head
screwdriver
Electrostatic
discharge (ESD)
gloves
Crimping tool

Huawei FusionModule5000 Specifications

General

Brand	Huawei
Model	FusionModule5000
Category	Wireless Router
Language	English