Need help?Do you have a question about the Huawei FusionServer RH2288H V3 and is the answer not in the manual?
General| Management | Huawei iBMC |
|---|---|
| Form Factor | 2U Rack |
| Processor | Intel Xeon E5-2600 v3/v4 series |
| Memory | Up to 1.5 TB DDR4 |
| Storage | Supports up to 12 x 3.5-inch or 25 x 2.5-inch SAS/SATA HDDs or SSDs |
| RAID Support | RAID 0, 1, 10, 5, 50, 6, 60 |
| Power Supply | 2 x 800W or 1200W (redundant) |
| PCIe Slots | Up to 6 PCIe slots |
| Operating Temperature | 5ºC to 45ºC (41ºF to 113ºF) Compliant with ASHRAE A3 and A4 standards |
Describes the software and hardware planning for the SAP HANA appliance.
Lists the target users for this document.
Defines the meaning of symbols used in the document.
Details the changes between document issues.
Covers the hardware planning for the SAP HANA appliance.
Outlines the software requirements and planning.
Details the internal disk planning for the appliance.
Lists default parameters for configuration.
Lists parameters that need planning.
Provides an overview of the installation steps.
Steps required before configuring the BIOS.
Details the steps to configure BIOS parameters.
Steps needed before configuring RAID.
Detailed steps for RAID configuration.
Steps for preparing the system for OS installation.
Step-by-step guide to install the operating system.
Steps to configure network settings for the server.
To Next Page