Huawei SAP HANA Appliance Single Node Installation
Guide (RH2288H V3+Broadwell+SLES11 SP4 For B1)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
About This Document
Purpose
This document describes the software and hardware planning of the Huawei RH2288H V3
Broadwell SAP HANA appliance, how to install a redundant array of independent disks
(RAID) controller card, SUSE for SAP OS, Peripheral Component Interconnect Express
(PCIe) solid-state drive (SSD), and SAP HANA database, and how to verify the installation.
By reading this document, audience can learn about the SAP HANA software and hardware,
and how to install a RAID controller card, OS, PCIe SSD driver, and SAP HANA database in
sequence (which cannot be changed).
Intended Audience
This document is intended for:
Technical support engineers
Maintenance engineers
Users
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.
Indicates a potentially hazardous situation which, if not
avoided, could result in equipment damage, data loss,
performance deterioration, or unanticipated results.
NOTICE is used to address practices not related to personal
To Next Page
Loading...
Need help?
General
