Need help?Do you have a question about the Huawei FusionServer Pro CH121 V5 and is the answer not in the manual?
General| Processor | Intel Xeon Scalable Processors |
|---|---|
| Number of Processors | Up to 2 |
| Memory Type | DDR4 |
| Management | iBMC (Intelligent Baseboard Management Controller) |
| RAID Support | RAID 0, 1, 10, 5, 50, 6, 60 |
| Power Supply | Hot-swappable, Redundant |
| Form Factor | 2U Rack |
| Storage | Up to 24 x 2.5-inch SAS/SATA/SSD |
| Network Ports | Up to 4 x 10GE |
Details the scope of the CH121 V5 compute node description.
Specifies target readers: administrators and end users.
Explains document symbols for warnings and notices.
Introduces the CH121 V5 compute node, its capabilities, and applications.
Describes the front panel's appearance, indicators, buttons, and ports.
Details processor support, installation rules, and compatibility.
Covers memory identification, architecture, compatibility, and installation guidelines.
Details drive configurations, numbering, indicators, and RAID controller cards.
Explains the Line-Optical Module (LOM) feature and its network ports.
Discusses PCIe card support and slot descriptions.
Details the mainboard and other associated boards.
Step-by-step instructions on powering off the compute node.
Details methods and steps for powering on the compute node.
Guides safe removal of a compute node from the chassis.
Instructions for safe installation of a compute node into the chassis.
Explains how to remove the top cover of the compute node.
Details removing SAS or SATA drives.
Instructions for removing NVMe drives, considering VMD.
Details installing NVMe drives, including driver requirements.
Specifies requirements for space, airflow, temperature, and humidity.
Details the hardware installation process, unpacking, and optional parts.
Step-by-step instructions for installing the compute node.
Covers default info, overview, password changes, IP, RAID, and BIOS.
Guides changing the default iBMC user password.
Details configuring the iBMC IP address.
Explains BIOS settings like boot sequence and passwords.
Guidance on installing an operating system.
General safety and handling precautions for optional parts.
Details installation procedures for various optional components.
Step-by-step guide for installing an M.2 FRU.
Instructions for installing a screw-in RAID controller card.
Detailed steps for installing a processor.
Instructions for correctly installing memory modules.
Covers general and personal safety guidelines for hardware installation.
Provides references for maintenance and warranty details.
Guidelines and precautions to prevent damage from electrostatic discharge.
Describes grounding methods to protect against ESD.
Lists key technical specifications of the compute node.
Details operating and storage environmental requirements.
Explains methods to find the iBMC management IP address.
Provides steps to access and log into the iBMC web interface.
Guides users on accessing and logging into the MM910 web interface.
Accessing compute nodes via MM910 Serial Over LAN (SOL).
Details logging into server desktops via remote consoles.
Instructions for logging into the CLI via PuTTY.
Covers enabling and disabling Intel Volume Management Device (VMD).
Guides on clearing data from storage devices using Linux commands.
Information on obtaining technical support from Huawei.
Lists software tools for routine server maintenance and management.
Explains SN format and importance for identification.
Describes server RAS features enhancing reliability and availability.
To Next Page